裝載機廠家分析山東裝載機的過熱現象

裝載機廠家 http://www.yw3773.com/發現，現在很多的地方都在使用山東裝載機，有些工作是離不開裝載機的，那我們在使用的時候會發現一些問題，我們在使用的時候突然發現裝載機過熱現象的原因是什么？The loader manufacturers found that now many places are using Shandong loader, some work is cannot do without loader, then we will find some problems in the use of the time, we suddenly found that when in use, what is the reason for the loader overheat?

現在我們就來了解下，山東裝載機適用在中小建筑施工，工地需要大量的混泥土。裝載機出現過熱現象，通常表現在發動機、變矩器、驅動橋和制動器總成上。在正常情況下，裝載機工作多長時間，這些總成均應保持一定的工作溫度。Now we come to understand that the Shandong loader suitable for small and medium construction, the site requires a lot of mixed soil. The overload of the loader, usually on the engine, torque converter, drive axle and brake assembly. Under normal circumstances, the loader to work for a long time, these assembly should maintain a certain working temperature.

除了發動機變速器油底外，若用手觸摸時，會感到燙痛難忍，即表明該處過熱。例如發動機過熱，說明冷卻系統有故障，會引起發動機的惡性事故；驅動橋過熱多系缺少潤滑油所致，如果不能及時排除，將引起齒輪及軸承等件磨損，變矩器及變速器的液壓油過熱，會引起離合器摩擦片磨損及變形等，因此對待過熱癥狀，必須引起重視，查找原因，予以排除。In addition to the engine gearbox oil bottom, if touched, will feel hot painful, namely that the overheating. For example, the engine overheating, cooling system failure, accidents will cause the engine overheating; driving axle system caused by lack of lubrication, if not promptly removed, will cause the gear and bearing wear parts, hydraulic oil overheating torque converter and transmission, will cause the clutch friction wear and deformation. Therefore, overheating symptoms, we must pay attention to, find out the reasons, be excluded.

換裝不同的輔助工作裝置還可進行推土、起重和其他物料如木材的裝卸作業。在道路、特別是在高等級公路施工中，山東裝載機用于路基工程的填挖、瀝青混合料和水泥混凝土料場的集料與裝料等作業。Different auxiliary equipment outfit can also be bulldozing, lifting and other materials such as wood handling operations. On the road, especially in high grade highway construction in Shandong, the loader used for filling digging, asphalt and concrete aggregate materials market and charging operations such as subgrade engineering.

通過以上裝載機廠家的詳細介紹，我們對山東裝載機過熱現象有所了解，希望以上的信息能幫助我們，有問題可以隨時咨詢我們。Through the detailed introduction of the loader manufacturers, we have some understanding of the phenomenon of overheating in Shandong loader, hope that the above information can help us, we can ask questions at any time.